Motorcycle
ignition kits include the ignition coil or
coils, rotor/encoder, spacers, washers and
ignition wires. The kit components will
vary depending on motorcycle chosen, number of
plugs per cylinder and whether the cylinders are
wasted spark. We can also create plug
wires to your desired length with the
appropriate boot type. These options will be
discussed when replying to your request for a
quote. Prices
are displayed in the drop down lists. Pick the
motorcycle ignition kit you are interested in
below. Scroll down for additional products
such as coils, plug wires etc. Multiple
products can be selected on the products page
before submitting a quote. Talk to us
about volume discounts.
|
Single
Cylinder Kit
Click
on an image for more Information
Choose
a make/model & Submit
Contact Information
|
Two
Cylinder Single Coil Kit (Wasted
Spark)
Click
on an image for more information
Choose
a make/model & Submit
Contact Information
|
Two
Cylinder Two Coil Kit
Click
on an mage for more information
Choose
a make/model & Submit
Contact Information
|
Ignition Modules
Purchase Ignition only either the CD2-LM (1-4
cylinder engines) or CD4-LM (1-8 cylinder
engines). Please specify what model/make the
ignition is going to be used for. Adapter,
spacers and encoder disk will be included. These
ignitions work only with Power Arc ignition
coils. An adapter is needed if interfaced with
coils with low resistance primaries (2.5 ohm and
higher). Click here for more information about
ignition modules.
Choose
an ignition module & Submit
Contact Information
|
Tractors/Recreational
Vehicles
We are currently developing ignition systems for
tractors. Utilizing IDS (Ignition Development
System) we can
rapidly produce custom ignitions and
distributors at a low cost. Click
here
for information on our rapid development
system for ignitions.
Click here
to leave
a description of what you need in the comments
section below along with contact information.
Link to IDS and rapid distributor development
|
|
Automotive/Military
Vehicles
We
are currently developing ignition systems for
cars, trucks, military vehicles etc. Utilizing
IDS (Ignition Development System) we can
rapidly produce custom ignitions and
distributors at a low cost. Click here
to leave
a description of what you need in the comments
section below along with contact
information. Click here
for information on our rapid development
system for ignitions. Contact PinzSSI
for Puch Pinzgauer, Unimog and Volkswagen
ignition systems.
|
Smart Point Modules
Smart
Point Modules are designed to work with your
existing points. They can be used with
either the MC-1 or MC-2 coil. They can
also be used in distributor based systems.
Click here for
smart point owners manuals.
Features
include:
● Snap action output which provides high output
with kick started engines to improve starting
●
Automatic coil shutoff to prevent damage to the
coil if the power is left on
●
Points draw virtually no current so they will
last longer and will not pit or burn
●
Static timing light to allow for more precise
and easier timing
●
6 High energy coil
●
6 Volt and positive ground versions available
|
|
All
coils except the SF coil work directly with CD#-L
or CD#-LM series ignitions.
The SF coil (3 ohm primary) requires a high
power adapter. Click here
for information on the adapter. Click here Quad and
Six Pack wiring diagrams. Click on the links
below for information on each coil.
Choose
a coil type & Submit
Contact Information
|
Plug
wires
Power Arc ignition wires are designed to be
physically tough, resist high temperatures and
provide excellent noise suppression. Spiral core
ignition wires with 90° plug boots are designed
to work with Power Arc ignition modules and
coils. Spark plug wires Include two boots either
90° plug boots or straight coil boots and brass
crimp connectors. We can custom cut wires to fit
your application at no additional charge. Please
specify the desired length and coil type in the
comments section below when requesting a quote.
Choose a plug wire & Submit
contact information
|
ECP
+ IDS Software Support
The ECP (Edge Card Programmer) is used when
programming IDS C, CD#-L
or CD#-LM
Series Ignitions (Windows PC Required). Visit
the web page or download the instruction manual
for additional details. Optional version with
power supply/power connector for bench
programming is available. Click here
for more information about the ECP programmer.
Choose a programmer & Submit
contact information
|
1.6"
Encoder
for IDS C, CD#-L
or CD#-LM
Series ignitions
Encoder Large Hole |
Encoder
small Hole |
Choose
an encoder & Submit
contact information
|
|
