Power Arc Ignitions


Precision Performance for 1, 2, 3, 4, 6 & 8 Cylinder Engines



WHY POWER ARC?

  • Reduce inventory costs and increase sales by stocking inexpensive adapter plates and a few ignition control modules instead of a different ignition for every application.
                   



Simply bolt on the adapter plate included in the kit.
Kit includes the encoder disk, adapters and  owner's manual.
     
Program the ignition to fit your application.  
Stop losing sales!  Now you can afford to stock for dozens of different engines/vehicles.


  • Power Arc's proprietary (Patented) optical ignition systems offer extreme stability which means smoother running engines with longer engine life. A truly different product, you will notice a difference with this ignition. Observe the erratic operation of a typical magnetic sensor based ignition in the animation above and decide for yourself.  This stability increases engine life and acceleration.

     

  • The new Power Arc IDS ignition development system can be used to create custom ignition systems for 1,2,H-D,3,4,6 and 8 cylinder engines. The system uses a precision optical pickup and a stainless steel rotor. The same rotor may be used for all engine types and can be mounted on the crankshaft or the camshaft. A wide variety of tachometers may be used 1,2,H-D,4,6 and 8 cylinder tachometers can be used regardless of the engine type the ignition is configured for. There are two configurable input sensors. Each sensor state creates a separate adjustable ignition advance curve and is graphically displayed. Each sensor state can have a unique Rev. Limit. Ignition curves can be copied and pasted  between sensor states. There can be up to 3 sparks per compression stroke. Each spark's timing can be independently adjusted by dragging points on the graph. The coils saturation or the time the coil primary is energized can also be controlled. Ignition advance curves can be directly downloaded from the computer into the ignition module.
  • All ignitions are computer designed from beginning to end.  Ignitions are produced by robotic assembly utilizing surface mount technology.




  • All Power Arc Ignitions are designed and manufactured in the U.S.A.

  • No weights required, advance settings are controlled electronically.

  • Multi-Spark- All ignitions are multi-spark and will maintain multiple sparks output through the entire RPM range when coupled with Power Arc coils.  This allows for a wider range of tune ability and low end torque.

  • Extreme ease of installation (no weights or remote module).

  • Coil/Battery Protection Circuit- The coils are only energized only when the ignition senses camshaft rotation.  In all other cases they are shut off.  This eliminates coil over heating, ignition damage and battery drain.

  • We sell high speed section bobbin coils not old style, slow recovery, paper section coils.

  • Knowledgeable about the products we sell, after all we design and manufacture them, we don't  just sell them.

  • Charge on Visa or Master Card.