Power Arc Ignitions

Precision Performance for 1, 2, 3, 4, 6 & 8 Cylinder Engines
 




The MC-1 miniature coil is a small single core single tower coil that can be easily daisy chained (multiple coils can be wired to fire off the same control signal).  A single coil is used on one cylinder engines. Two coils may also be used with non-symetrical cylinder angles (one coil core per cylinder) on two cylinder engines, for  example when single firing a Harley-Davidson motorcycle. 
Three or four coils can also be used on three and four cylinder engines.  One coil per cylinder is required.

COMPACT SIZE ALLOWS MOUNTING IN TIGHT  AREAS
CAN BE DAISY CHAINED
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
CAPABLE OF 80,000 VOLTS OF OUTPUT
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER


Power Arc MC-1 Coil


SINGLE TOWER SINGLE CORE MINIATURE COIL 



Buy Now



The MC-2 miniature coil is a small single core dual tower coil that can be easily daisy chained (multiple coils can be wired to fire off the same control signal). This coil is used to waste spark engines with symetricaal cylinder angles (45,
60,  90 or 180) or when dual firing a Harley-Davidson motorcycle.  One coil for every two cylinders is required.

COMPACT SIZE ALLOWS MOUNTING IN TIGHT  AREAS
CAN BE DAISY CHAINED
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
CAPABLE OF 80,000 VOLTS OF OUTPUT
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER


Power Arc MC-2 Coil


  DUAL TOWER SINGLE CORE MINIATURE COIL 



Buy Now




The MP-3 miniature coil pack uses three small dual tower MC-2 coils hooked to a single mount plate. This coil pack is used to waste spark six cylinder engines with 180 degree opposing cylinders. Includes 6 pin sealed automotive grade connector.


COMPACT SIZE ALLOWS MOUNTING IN TIGHT  AREAS
CAN BE DAISY CHAINED
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
CAPABLE OF 80,000 VOLTS OF OUTPUT
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER


Power Arc MP-3 Coil Pack


  Coil Pack With Three MC-2
Single Core
Dual Tower
Wasted Spark Coils



Buy Now



The ST
coil is a single core single tower coil A single coil is used on one cylinder engines. Two coils may also be used with non-symetrical cylinder angles (one coil core per cylinder) on two cylinder engines, for  example when single firing a Harley-Davidson motorcycle.   Three or four coils can also be used on three and four cylinder engines.  One coil per cylinder is required.


CAPABLE OF 80,000 VOLTS OF OUTPUT
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
BRASS TERMINAL LUGS
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER




Power Arc ST Coil


SINGLE TOWER SINGLE CORE COIL 

Dimensional Drawing

Buy Now



The DF single core dual tower coil is used to waste spark engines with symetricaal cylinder angles (45, 60, 90 or 180) or when dual firing a Harley-Davidson motorcycle.  One coil for every two cylinders is required.

DUAL FIRE/SINGLE FIRE DUAL PLUG COIL
CAPABLE OF 80,000 VOLTS OF OUTPUT
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
BRASS TERMINAL LUGS
STAINLESS STEEL NUTS & LOCK WASHERS INCLUDED
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER

Power Arc DF Coil


DUAL TOWER SINGLE
CORE COIL

Dimensional Drawing

Buy Now



The SF dual core dual tower coil pack is used when single firing (one coil core per cylinder) Harley-Davidsons or for other two cylinder engines that do not have symetrical 180 degree opposed cylinders and require 2 separate coil cores. One coil pack for every two cylinders is required.

TWO COILS IN ONE PACKAGE
CAPABLE OF 80,000 VOLTS OF OUTPUT
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
EASY INSTALLATION (MOUNT ONLY ONE COIL PACK)
BRASS TERMINAL LUGS
STAINLESS STEEL NUTS & LOCK WASHERS INCLUDED
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER


Power Arc SF Coil Pack

 

DUAL TOWER

DUAL CORE  COIL PACK


Buy Now



The QT-2 quad tower coil pack is a two core coil pack with four outputs.  It has two independent two output coils.  It is typically used to waste spark 4 or 8 cylinder engines. One coil pack is required for a 4 cylinder engine and two packs for an 8 cylinder engine.


ONE COIL PACK CAN BE USED FOR 4 CYLINDERS
CAPABLE OF 80,000 VOLTS OF OUTPUT
EXTREMELY FAST RISE TIMES
FULL VOLTAGE OUTPUTS IN MULTI-SPARK
HIGH AMPERAGE OUTPUT
EASY INSTALLATION (MOUNT ONLY ONE COIL PACK)
QUICK DISCONNECT CONNECTOR
FIRES AT LOW VOLTAGES FOR EASY STARTING
SECTION BOBBIN CONSTRUCTION, NO PAPER


Power Arc QT-2 Coil Pack

QUAD TOWER DUAL CORE COIL PACK


Dimensional Drawing

Buy Now